The Aurora Side Shooter LED off road lights feature a uniquely molded design that stands out from the rest.

These off road lights come equipped with four powerful, 5-watt Osram LED's that are forward facing and an additional two, Osram LEDS on each side of the LED light cube. When you hit the switch these lights will emit a bright LED light at remarkable 180 degrees.

This top selling off road light kit is equipped with anti-glare properties and is available in two beam patterns:

Flood: Emits the LED light at 60 degrees which discharges a very wide beam.

Spot: Emits the LED light at 10 degrees which discharges a very narrow beam.

Aurora Side Shooter Off Road Light Specs:

• Lumens: 3,808 Combined (1,904 per light)
• Beam Type: Flood or Spot ( Use Drop down to select)
• Number of LED's: 8
• Amp Draw: 2.2 (Per light)
• Overall height when mounted: 3.9"
• ingress Rating:  IP69

What's in the Box?

• Two Side Shooter LED Pod Lights with Female Deutsch Connector

• Two Mounts

• One Deluxe Wiring Harness - The Aurora wiring harness consist of an on/off switch with LED indicator light, in-line fuse, 12v40A relay, and all the wiring you need for professional installation.

LED SIDE SHOOTER EXTERIOR

• Outdoor Dupont painting coats the LED light bar housing, guaranteeing the housing will remain unchanged for 5 years.
• To prevent unwanted wind noise Wind Reducers are equipped to ensure a quiet experience during high speed travel.
• All LED side shooters are equipped with a Deutsch connector which is globally renowned for its ability to be waterproof and its ease of use.
• The LED Light Bar is equipped with a special breather apparatus that is uniquely designed to prevent condensation and water intrusion.
• The lens is crafted from high quality GE Lexan which is 300 times stronger than glass plus its resistant to corrosive acids and other chemicals such as gasoline. 

LED SIDE SHOOTER INTERIOR

• Aurora LED Side shooter pods are made with Osram LED chips which allows for low forward voltage, low heat generation, long life and high ESD tolerance and resistance.
• The PCBA (Printed Circuit Board Assembly) is engineered with unique temperature protection, voltage protection and current protection designs to maximize efficiency and increase durability. This unique design means no electromagnetic interference with other nearby electronics on your vehicle.
• Over voltage protection is installed prevent premature failure from accidental voltage fluctuations.

LED SIDE SHOOTER TESTING

• Salt & Fog Testing: A highly corrosive testing measure involving a high saline environment. The purpose of this test is to allow the LED Light Bar to retain its coating from salt spayed on the roads in the winter seasons which also means the product can withstand sea water.
• Lens Impact Test: A 17-ounce iron Ball is dropped onto the glass from a height of 40 inches to mimic the impact of a rock or other foreign debris coming into contact with the LED light.
• Vibration Test: Ensures the LED Light bar is stable enough to remain on the vehicle during extreme driving conditions like trail riding, off roading, rock climbing, etc.
• UV Test: The LED Light Bar is placed in a special UV emitting machine for two days which simulates an environment equal to 5 years of direct UV lighting exposure.
• Temperature Test: The LED light bar undergoes both extreme high and low temperature conditions to make ensure the housing will not discolor.