STRIKER 4 fishfinder with portable carrying case is perfect for fishing from a kayak or canoe and is especially handy for ice fishing. Mark and return to your hot spots, boat ramps and docks. You also can share your favorite waypoints and routes with other STRIKER and echoMAP ™ chartplotter combos. Smooth Scaling ™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Features carrying case, rechargeable battery, CHIRP (77/200 Kilohertz) transducer and a tilt/swivel mount.

Garmin 100155010 Attributes

• Display Size: 3-1/2 Inch LCD
• Display Resolution: 480 X 320 Pixels
• Overall Dimensions: 3.6 Inch Length X 5.9 Inch Width X 1.6 Inch
• Sonar Compatibility: Dual-Beam Traditional 50/77/200 kHz CHIRP Mid And High Transducer
• With Built-In GPS: Yes
• Mount Type: Flush/ Tilt/ Swivel Mount
• Used To: Find Fish, Mark And Return To Hot Spots, Docks And Ramps
• Interface: Keypad
• Waterproof: IPX7 Rating Waterproof
• Power Supply Voltage: 10 To 20 Volt
• Ampere Rating: 2.76 Amp
• Weight: 10.8 Pound

Garmin 100155010 Features & Benefits

• Easy-To-Use 3.5 Inch Color Fishfinder With Built-In, High-Sensitivity GPS
• Portable Carrying Case Is Perfect For Kayak, Canoe Or Ice Fishing
• Find Fish, Mark And Return To Hot Spots, Docks And Ramps
• Features CHIRP (77/200 Kilohertz) Sonar Transducer
• You Can Quickly And Easily See Your Boat's Speed On The Screen Of Your STRIKER Fishfinder
• Limited 1 Year Warranty

Garmin 100155010 Installation Instructions

• ISPI_Marine_Depth.pdf
• STRIKER_4_Install_ML.pdf
• Striker_OM_EN-US.pdf

Garmin 100155010 Warranties

• garmin-marine-warranty-policy.pdf

Garmin 100155010 Technical Bulletins

• ISPI_Marine_Depth.pdf
• Striker_OM_EN-US.pdf

STRIKER™ 4 Portable Fishfinder Bundle with 77/200kHz Transducer

3.5-inch CHIRP Fishfinder with GPS and Portable Kit

Features:

• Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS
• Portable carrying case is perfect for kayak, canoe or ice fishing
• Find fish; mark and return to hot spots, docks and ramps
• Includes CHIRP (77/200 kHz) sonar transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak)
• Upgrade to high performance CHIRP with a GT8 or GT15 transducer (each sold separately)

STRIKER 4 fishfinder with portable carrying case is perfect for fishing from a kayak or canoe and is especially handy for ice fishing. Mark and return to your hot spots, boat ramps and docks. You also can share your favorite waypoints and routes with other STRIKER and echoMAP™ chartplotter combos. Smooth Scaling™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Includes carrying case, rechargeable battery, CHIRP (77/200 kHz) transducer, tilt/swivel mount and transom and trolling motor mounting kit. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately).

Experience the Clarity of CHIRP

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.

You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what's below.

Mark Spots with High-Sensitivity GPS

Unlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.

Navigate Easily with Waypoint Map

Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It's also a great tool for finding your way back to the boat ramp.

Check Your Speed on Screen

You can quickly and easily see your boat's speed on the screen of your STRIKER fishfinder. It's a great tool to make sure you are trolling at the right speed for the lure you're using and for a particular fish species. It's also a good way to tell if you are going the right speed in wake-controlled areas.

Fish Vertically with Built-in Flasher

STRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.

Take Your Fishfinder Anywhere

The portable kit protects and carries your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.

In The Box

• STRIKER 4
• Dual-beam transducer
• Tilt/swivel mount
• Portable bag
• Base/handle
• Suction cup mount
• Foam float
• Kayak In-hull Transducer Mount
• Power cable
• Rechargeable battery
• AC charger
• Documentation

Connections

• Transducer pin numbers: 4 Pin